Battery Guard 2000 200A

Part number: (+1 more)

The Battery Guard constantly monitors available battery power when the engine is not running, if the battery voltage falls below 12.1v or 24.1v a voltage sensitive timer in the ECU is triggered.

More product information

About the product

If the available battery voltage remains below 12.1v or 24.1v uniformly for 2 minutes, the Battery Guard 2000 200A ECU provides an output that can drive a buzzer and activate a dash mounted reset switch which will be flashing.

If the voltage remains below 12.1v or 24.1v uniformly for a full four minutes, the batteries will be automatically isolated, to guarantee starting power. At this stage there will be no power at the ignition switch, the vehicle operator must press the flashing reset switch and then start the engine within the four minute timer period.

200A Battery Guard also offers the vehicle operator the ability to manually isolate the batteries via the Battery Guard reset switch.

100A Battery Guard also available.

Benefits

Technical Data

Nominal Voltage: 12/24 VDC
Approvals: 'e’ Approval EMC 95/54/EC


Nominal operating current	12v	24v
Actuation current	5.6 amps	2.8 amps
Minimum actuation voltage	9 volts	18 volts
Maximum continuous carry	200 amps	200 amps
Maximum (30 seconds) carry current	1200 amps	1200 amps
Ambient temperature range	-40° to 85°C	-40° to 85°C
Normal input voltage range	10-16 volts	20-32 volts
Contact life at full load	min 10,000 cycles	min 10,000 cycles
Standby current	< than 1 milliamp	< than 1 milliamp
Short term over voltage protection to	+24 volts	+36 volts
Reverse voltage protection to	-800 volts	-800 volts
Positive voltage protection to	+150 volts	+150 volts