MCS-CIM CAN Interface Module

By monitoring On/Off (12 volts On and 0 volts Off) signals directly from vehicle functions or auxiliary equipment the MCS-CIM CAN Interface Module converts these into a data stream to feed into another devices CAN Bus data port that would typically be on a telematics device.

By monitoring On/Off (12 volts On and 0 volts Off) signals directly from vehicle functions or auxiliary equipment the unit then converts these into a data stream to feed into another devices CAN Bus data port that would typically be on a telematics device.

Ideal application
Convert an existing Standby RSG Voyager based telematics installation to a FleetMotus based solution.

Absolute Maximum Ratings

Supply Voltage: 32 Volts DC
Supply Current: 3 Amps

Electrical Characteristics

Operating Voltage: 12 to 24 Volts DC
Standby Current: 100 Milliamps @ 13.8VDC

Temperature

Standby Temperature: -20°C to +70°C
Operating Temperature: -20°C to +50°C

Nominal Voltage: 12/24 VDC
Current Consumption: Standby Current: 100 Milliamps @ 13.8VDC
Supply Current: Max. 3 Amps @ 32 VDC
Inputs: 20
Outputs: 1 x CAN Bus
Length: 78mm
Width: 74mm
Height: 20mm
Operating Temperature: -20°C to +50°C
Storage / Transport Temperature: -20°C to +70°C

Typical Outputs:
Sidelights	1st Stage Retarder
Dip Beam	2nd Stage Retarder
Main Beam	Ladder Rack
Indicator Left	Water Pump
Indicator Right	PTO Engaged
Foot Brake	Engine Run / Alternator Charging
Hand Brake	Engine Crank / Starter Motor Engage
Doors Open	Locker Opened