MCS-32 Universal Controller

Features & Functions

Outputs 

32 Outputs:

• 16 Hi Power Outputs
  – 20 Amps per channel
  – Current limiting
  – Multi flash patterns
  – Timer shutdown
  – Voltage drop out
• 12 Low Power Outputs
  – 600mA per channel
  – Positive or Negative switching
  – Provide monitoring signal inputs (not high impedence)
  – Negative polarity to switch low power relays
• 4 Medium Power Outputs
  -2.5 Amps per channel
  – Positive & Negative polarity switching
  – Provide monitoring signal inputs
  – Drive relays
  – Small motors
• 2 diode pairs built-in for headlight and/or tail light flashers
• Output to data logger
• Electronic Fuses
  – Electronically adjustable
  – Electronically tripped

Inputs 

• 24 Configurable Inputs
  – 12 negative switching
  – 12 positive switching
  – Software configurable
• 4 Standard Inputs
  – Mic input
  – Radio input
  – Reset
  – Standby

Multi-Way Switch Options 

• Universal Multi-Way handset can be fully configured using the MCS software
• Single or up to 4 handsets

Serial Data Port 

• RS485 protocol
• RS232 – via adaptor
• Link with third party MDT terminals
• USB Port

CAN or CAN Type Data Port 

• Link to RSG complementary devices such as a lightbar
• Link to other industry new standard devices
• Link with legacy equipment

User Interface 

• 24 illuminated status indicators
• Indicates flash pattern
• Communication status
• Provides output status
• Green – OK
• Red – Over current
• Amber – Low voltage

Specification 

• 12/24 volt operation
• 100 Amps total output
• ECE R10 approved

3 year manufacturers warranty

Software Operational Modules

100 Watt Siren

• Supports 8 or 11 ohm speakers
• Can be enabled from an input or handset
• Air horn input
• HRT positive or negative activation
• Multiple siren tones selected from software
• Monitor signal active when siren on
• PA and radio re-broadcast facility
• UK and European sounds
• City Mode volume reduction feature
• Workshop mode volume suppression feature for testing
• Can be linked with other MCS siren devices to give two vehicle effect

Load Shedding Module

• Via internal or external monitoring
• Automatic in conjunction with other equipment activation

Fan Control Module 

• Control up to 4 intake/extractor fans
• Reverses power supply to fans
• Optional 4-way Relay Expansion Module

Saloon Lighting Module 

• Ideal to control internal ambulance lighting
• Manual, semi and full automatic operation

Cabinet Anti-tamper Module 

• Monitor 16 ambulance medical lockers
• Ideal for monitoring medical consumables/medicines
• Cabinet re-stock indication

Audio Intercom Controller (operates with external device)

• Announce pre-recorded messages
• Duplex or simplex intercom

Split Charge Controller 

• Monitors primary battery voltage
• Output drives charging solenoid to charge secondary battery
• Solenoid in and out voltage programmable

Run Lock Controller 

• Outputs
  – 3 dedicated run lock outputs (2 with diodes)
  – Additional outputs assigned from software
• Enable Inputs
  – Inputs assigned in software
  – From handset, handbrake, remote button etc.
  – Hi or Lo inputs
• Reset Inputs
  – Inputs assigned in software
  – From brake light, remote button etc.
  – Hi or Lo inputs

Headlight Flash 

• Dedicated outputs x 4 (with built-in diodes) to control headlights and/or complementary flashing lamps

Gateway radio controller 

• Automatically switches between the Main & Gateway Radio (for built-up areas) within a 30 second window for the driver to exit the vehicle
• Automatic handbrake detection

Additional features

• 16 x AND logic modules
• 16 x OR logic modules
• 32 x timer modules (1 second increments)