MCS-CANIO CAN Bus Interface Module

Part number: UNI-CAN-003

By extracting information from the vehicle CAN Bus system the MCS-CANIO CAN Bus Interface Module converts these into a set-up of up to 10 conventional on/off (12 volts on and 0 volts off) signals to turn lights and/or other control units on and off.

10 x relays Drive Outputs (Total 10 Amps Max)
Speciﬁc vehicle selected via 4-way dip switch

Features

1 x CAN Bus Connection Power to Device
2 x CAN Bus Connections
4 x Inputs
4 x Power Inputs
4 x On/Off 3AMP Outputs
2 x On/Off 10 AMP Outputs 10 AMPS Total

Absolute Maximum Ratings

Supply Voltage: 32 Volts
DC Supply Current: 10 Amps

Electrical Characteristics

Operating Voltage: 12 to 24 Volts DC
Standby Current: 50.0 Milliamps @ 13.8VDC

Output Drive:

Single Output: 3 Amps Max
10 x Outputs 10 Amps Max (equivalent to 1 Amp per output)

Temperature

Standby Temperature: -20 Deg C to +70 Deg C
Operating Temperature: -20 Deg C to +50 Deg C

Nominal Voltage: 12/24 VDC
Current Consumption: Standby Current: 50.0 Milliamps @ 13.8VDC
Supply Current: Max. 10 Amps @ 32VDC
Inputs: 4
Outputs: 10
Length: 78mm
Width: 65/105mm
Height: 30mm
Operating Temperature: -20°C to +50°C
Storage / Transport Temperature: -20°C to +70°C

Typical Outputs:
Ignition	Tailgate Door
Sidelight	Hand Brake
Dip Beam	Stop Lamps
Main Beam	Doors Open
Indicator Left	Engine Run / Alternator Charging
Indicator Right	Engine Crank / Starter Motor Engage
Foot Brake / Speed Levels

MCS-CANIO CAN Bus Interface Module

More product information

About the product

Benefits

Drawings

Technical Data