100W Basic Standalone Siren (MCS-SSA)

MCS-SSA functions and features

• 12v and 24v operation
• Interconnects to related products via proprietary CAN Bus
• Can be enabled from an input or compatible multi-way switch
• Hands free operation via the HRT (Horn Ring Transfer) feature enables scrolling through pre-selected siren tones
• Selectable UK siren sounds with Air/Bull horn option Siren active output (ideal as Data Recorder Input)
• On board status LEDs
• Supports 8 and 11 ohm speakers
• City mode volume reduction feature

The MCS-SSA can also be linked with other compatible siren devices to create a ‘two siren’ sound effect from one vehicle when used with one of the following devices

• MCS-32 Universal Controller Plus UNI-PLS-001
• MCS-SE Universal 100 Watt Siren UNI-SIR-001

With the following system functions and features

• Tones from each unit will be different
• Tones from each device will be un-synchronised to give a two vehicle effect
• Dual 100 Watt Siren outputs via two separate 100 Watt speakers

Absolute Maximum Ratings

• 34 volts DC supply voltage
• 15 Amps maximum
• 4 milliamps typical standby current – switch de-activated
• 22 milliamps typical standby current – switch activated
• 35 milliamps maximum standby current – switch activated
• -20ºC to 70ºC standby temperature
• -20ºC to 65ºC operating temperature

Power

• 1 x DC on pluggable adaptor (15 Amp fuse must be used)
• 1 x Ground/chassis connection (should be rated to handle 15 Amps or more)

Digital Inputs

• 1 x positive/negative switched
• 1 x positive switched (HRT, Airhorn)
• 1 x negative switched (HRT, Airhorn)

Analog Monitoring

• Incoming system voltage sense
• Internal temperature monitor
• Siren system current monitor

Outputs

• 100w siren speaker output 8 or 11 ohm selectable

Communication

• 1 x CAN Bus 2.0 full speed interface